ads blade al for 05 jetta windows?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136031
Printed Date: May 02, 2024 at 7:56 AM
Topic: ads blade al for 05 jetta windows?
Posted By: freqsounds
Subject: ads blade al for 05 jetta windows?
Date Posted: February 09, 2014 at 10:44 AM
Does the ADS-BLADE AL roll the windows up/down in this car? I've been using DEI bypass modules and looking to explore new options, but my last customer has the DBALL2 which rolls the windows down via the databus, but not up for some reason. I've been searching for a solution for him but can't find one. Any help would be appreciated!
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
Replies:
Posted By: freqsounds
Date Posted: February 11, 2014 at 2:01 PM
*bump* Anyone?
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: daflipcyde
Date Posted: February 13, 2014 at 1:58 PM
I'm guessing aux 1 on dball is programmed for window down. So now program aux 2 for front window up and aux 3 for back window up.
Posted By: freqsounds
Date Posted: February 13, 2014 at 2:50 PM
I tried that and it doesn't work. I also tried the gas door on aux2, that doesn't work either.
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: daflipcyde
Date Posted: February 14, 2014 at 6:28 AM
What brand of remote start on that vehicle? Do you have the brain aux set to constant or latched output?
Posted By: freqsounds
Date Posted: February 14, 2014 at 3:48 PM
It has the Viper 5202.
I haven't configured the aux outputs at all on the Viper because it's using D2D mode.
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: daflipcyde
Date Posted: February 14, 2014 at 4:30 PM
Factory default is set to validity so you have to hold down the aux button continuously until windows are up then release button.
Posted By: freqsounds
Date Posted: February 14, 2014 at 4:32 PM
Right, but the windows up doesn't work at all, Windows down does...
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: daflipcyde
Date Posted: February 15, 2014 at 3:27 AM
Which 2 aux you have windows to go up? What buttons you pressing on viper remote for each aux?
Posted By: freqsounds
Date Posted: February 16, 2014 at 9:25 PM
Aux1 = Front Windows Down = (F)x1 + aux (works)
Aux2 = Rear Windows Down = (F)x2 + aux (works)
Aux3 = Windows Up = (F)x3 + aux (doesn't work)
I can program Windows Up to any of the aux channels, and it doesn't work.
But, going back to the original question, does the ADS Blade control the windows? If so, I'm just going to swap out the bypass. These DBALL units have been a thorn in my side.
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: harryharris
Date Posted: February 18, 2014 at 4:17 AM
In that instance can't you program comfort close on the DB-ALL to raise the windows?
-------------
Test before boxing up.
Posted By: cdx280
Date Posted: February 18, 2014 at 8:09 AM
Have you tried locking the doors first before triggering the aux output for windows up?
Posted By: freqsounds
Date Posted: February 18, 2014 at 8:11 AM
cdx280 wrote:
Have you tried locking the doors first before triggering the aux output for windows up?
I have not tried that, but I will! I know these cars can be very temperamental. ------------- No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: freqsounds
Date Posted: February 18, 2014 at 8:13 AM
harryharris wrote:
In that instance can't you program comfort close on the DB-ALL to raise the windows?
I could, but doesn't the Comfort Closure just fire the AUX channel? I haven't done anything with Comfort Closure before, so I'm not 100% sure, but it would make sense if if just fires the AUX automatically. ------------- No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: harryharris
Date Posted: February 18, 2014 at 8:32 AM
First comfort closure replaces the 0.4 or 0.8 lock outputs with a 20 second timed output.
Nothing to do with the aux outputs.
Secondly programming of the alarm and or R/S isn't needed for these functions, all done by the DB-ALL.
Thirdly have you looked at page 20 of the DB-ALL instructions.
-------------
Test before boxing up.
Posted By: freqsounds
Date Posted: February 18, 2014 at 8:39 AM
Alright, that makes sense. I've never programmed the comfort closure before (never had a reason to mess with it).
I will try to enable the comfort closure and see what happens. If this is programmed, will comfort closure roll up the windows any time the doors are locked? If so, the customer is going to throw a fit lol, he's one of those guys...  ------------- No question is stupid or not worth asking. You were once a noob, right? :)
Posted By: harryharris
Date Posted: February 18, 2014 at 8:39 AM
Or from your unit take the 2 aux wires and relay each to increase the current, unlock with a 259R resistor, neg to neg then to a GREEN / WHITE in the factory door module this will give you window close/open without affecting the DB-ALL.
-------------
Test before boxing up.
Posted By: harryharris
Date Posted: February 18, 2014 at 8:43 AM
I've always done them that way when using a DB-ALL, what I mean is ignore my last post I would have assumed you'd have read the instructions on page 20.
Using comfort close automatically closes windows and roof when present, using an aux means more button pressing to achieve it.
-------------
Test before boxing up.
Posted By: harryharris
Date Posted: February 18, 2014 at 8:43 AM
Sorry, can't edit, what I should have written is more button pressing and linking it to arm.
-------------
Test before boxing up.
|