viper 5704 2000 nissan maxima
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136076
Printed Date: September 13, 2025 at 4:17 AM
Topic: viper 5704 2000 nissan maxima
Posted By: dgames21
Subject: viper 5704 2000 nissan maxima
Date Posted: February 16, 2014 at 11:24 AM
I want to install a remote start in 2000 nissan maxima using viper 5704. just wondering if somebody could tell me if the wiring is the correct way.
car wiring diagram. https://alarmsellout.com/support/diagrams/vehicle/NISSAN%20MAXIMA%201987-2005.pdf
Viper wiring manual. https://pdf.ampire.de/viper/N5704_2011-09b_web.pdf
Here is the wiring.
Maxima - 12v constant Green
Viper - H1/1 Red (+) 12DC constant input
Viper - H3/2 RED / White (87) Flex Relay +12V input (30A Fused)
Viper - H3/6 Red Ignition 1 (+) 12V input (30A fused)
Viper - H3/9 RED / Black Accessory/Starter relay (30A fused)
Maxima - 12V Ignition Wire BLACK/ Red (Smaller Wire)
Viper - H3/1 Pink (+) Ignition wire Input/Output
Maxima - Starter Wire BLACK/ Red or BLACK/ White
Viper - H3/4 Violet (+) Starter Output to Car Side.
Viper - H3/5 Green (+) Starter Input to Key Side.
Maxima - Second Starter wire BLACK/ Blue
Viper - H3/7 Pink/White (30) FLEX RELAY OUTPUT Program to work.
Maxima - Accessory Wire RED / yellow
Viper - H3/3 Orange
Maxima- Second Accessory Wire WHITE/ Blue
Viper - H2/22 Orange (-)200ma Accessory output. Use Relay
85 - H3/3 Orange Accessory Output wire.
86 - H2/22 Orange (-) 200 ma Accessory output wire.
87 - Accessory Wire
30 - 12V constant
87a not used.
Nissan - Parking lights (+) RED / Blue
Viper H1/5 White.
Nissan - Factory alarm Arm (-) ORANGE / Black
Viper H2/24 GREEN / WHITE
Nissan - Factory alarm Disarm (-) ORANGE / Blue
Viper - H2/4 GREEN/ Black
Nissan - Tachometer WHITE/ Green
Viper - H2/23 Tach input Violet/White
Nissan - Brake wire (+) RED / Green
Viper - H2/16 Brown.
Replies:
Posted By: smokeman1
Date Posted: February 16, 2014 at 2:27 PM
Change the pin 85 of your relay to the H2/22 (-) trigger.
Pin 86 and 30 to a constant 12 volt source and 87 out to 2nd accessory.
https://www.the12volt.com/relays/page1.asp#n2p
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: dgames21
Date Posted: February 16, 2014 at 5:52 PM
One more question For the factory arm/disarm can i hook straight to the (-) wires or do i need relays.
Posted By: smokeman1
Date Posted: February 17, 2014 at 6:16 AM
Shouldn't need a relay for the Factory Alarm Disarm
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: dgames21
Date Posted: February 17, 2014 at 11:04 AM
Thank you for all your help. Just trying to do as much research as possible before attempting install.
Posted By: smokeman1
Date Posted: February 17, 2014 at 11:17 AM
Take your time, One wire at a time. Plan on the weekend at least. Use a DMM.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: dgames21
Date Posted: February 23, 2014 at 8:06 PM
I got the alarm and remote start working with out any problems I did it over the weekend like you said. it Took me almost a day and half used a DMM to. Thanks for your help.
|