2006 toyota tacoma compustar drone
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136107
Printed Date: May 13, 2024 at 7:50 PM
Topic: 2006 toyota tacoma compustar drone
Posted By: fdny136
Subject: 2006 toyota tacoma compustar drone
Date Posted: February 20, 2014 at 7:53 AM
2006 tacoma compustar 6200 ads-tb drone 3100.onitially did the install using idatalink blade and was advised by tech support in this vehicle its better to use ads-tb module. Vehicle always remote starts via the push button remote .the drone however seems unreliable via iphone.the 3100 is installed high in the dash behind the cluster. The customer states only works sometimes and sometimes it cranks vehicle but doesnt start? Looking for any feedback thank you
Replies:
Posted By: blanx218
Date Posted: February 20, 2014 at 3:34 PM
How old is the drone. I was told they had a bad batch of them not too long ago. Mine works when it wants to as well. But it always starts when it does work. When it doesn't work I get a communication error message on my phone. If it doesn't crank long enough I would be connecting a tach. I don't think the brain cares how it got the signal to start. It should perform no different than what it does from the remote.
Posted By: fdny136
Date Posted: February 23, 2014 at 11:14 AM
i purchased my drone stock in november
Posted By: qpham504
Date Posted: February 25, 2014 at 10:54 AM
How did you wire the remote start? I'm trying to figure that out.
Posted By: fdny136
Date Posted: March 04, 2014 at 10:07 PM
what do you mean ? how did I wire remote start?
Posted By: qpham504
Date Posted: March 29, 2014 at 8:30 AM
Well there are two ignition wires and two starter wires and I'm just trying to confirm what way works.
Posted By: fdny136
Date Posted: April 27, 2014 at 9:58 AM
used both
|