04 grand cherokee door connector pin

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136114
Printed Date: April 28, 2024 at 2:13 PM

Topic: 04 grand cherokee door connector pin

Posted By: reopfd4mwtnmq77
Subject: 04 grand cherokee door connector pin
Date Posted: February 20, 2014 at 3:18 PM

The wires in pin 4 and 7 on my front driver side door connector (the body side of the connector, not the door side) broke from years of opening/closing the door making the wires brittle.

They broke very close to the pins. I am looking to solder new lengths of wire in the footwell, installing a new pin on the end of each. I'm having a hard time finding the correct pin

Here are the pins

Here is the component connector on the end of the harness which these pins go into

Here is the list of pins/wires

This is where the connector is

Can anyone tell me exactly what the pin is for this C302 connector?

Replies:

Posted By: harryharris
Date Posted: February 20, 2014 at 4:07 PM

Chrysler dealership.

-------------
Test before boxing up.

Posted By: kreg357
Date Posted: February 20, 2014 at 5:16 PM

Another option. While it's not as easy in the N.E. as other parts of the country, you could try a junk yard. Might be able to get the whole connector with the wires cut after it enters the passenger compartment. Not new, but serviceable with plenty of spares.

-------------
Soldering is fun!

Posted By: harryharris
Date Posted: February 21, 2014 at 3:05 AM

Thanks K. I forgot that one!
I was also going to suggest Farnell or Mouser but you'd probably have to buy a 100 pack.
Out of interest on your remote start H1/4,5 and 6 aren't being used, the pins look similar, try depinning them.
Last thought two 18" lengths of same gauge wiring, Radio Shack etc.
Solder and go through the C302 plugs, drill through if needed.
You problem is that are literally hundreds of similar automotive connectors, Amp, Molex, etc. etc.

-------------
Test before boxing up.

Posted By: Ween
Date Posted: February 21, 2014 at 7:58 PM

mopar package #05013961AA

Posted By: reopfd4mwtnmq77
Date Posted: April 10, 2014 at 12:42 PM

I tried mouser and TC, both of which I was able to order free (including shipping) "samples" - strips of 10 or so connectors of my choice. I got a couple that were close but not quite right.

Ween's Mopar part # is the exact part I needed. I didn't want to pay $50 many were asking, and ended up finding someone on eBay selling a similar part: #05013963AA. The wires were identical and it cost far, far less though, more than free.

posted_image

Thanks, guys. I got power back to the door. For anyone who stumbles across this thread in the future, I have 12 wires left with the pins attached. I'm happy to send you what you need free of charge.

Posted By: jeepin4eva
Date Posted: January 21, 2015 at 9:00 PM

Hi! I know it's been almost a year but any chance you still have a wire (or two) to spare? I'm installing foglights on my TJ and this is exactly what I need to connect to the half completed factory wiring. Thanks :)

Posted By: reopfd4mwtnmq77
Date Posted: January 22, 2015 at 11:02 AM

I'll check when I get home, but am quite certain I do have a bunch left. PM me your address and what you need. I'll send them out this week!

Posted By: jeepin4eva
Date Posted: January 23, 2015 at 12:54 PM

Thanks Reo! I PMed my address. Let me know your paypal and I'll cover your time and effort. :)