compustar cs 800/2007 mercury montego
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136117
Printed Date: April 28, 2024 at 1:29 PM
Topic: compustar cs 800/2007 mercury montego
Posted By: co_ne_dub
Subject: compustar cs 800/2007 mercury montego
Date Posted: February 20, 2014 at 8:00 PM
Let me preface this by saying I have been installing Python RS's for years. Decided to jump over to Compustar and trying out their new CS800. The issue I am having is on this montego it will start one time and then attempt to start the next. With the Pythons I would always hardwire all the connections(power,GWI, ground, so on) I use mainly iDatalink bypasses.
On this particular vehicle I tried the 2 way datalink protocol. Could that be causing my issue?
Maybe the bypass and the RS are dropping communication. Should I try the 1 way data?
Replies:
Posted By: kreg357
Date Posted: February 20, 2014 at 8:47 PM
I haven't used / seen any CS800's yet but the last I heard the CS600 brain used with the CS600 and CS700 units is only one-way D2D compatible. Don't know what they are using on the CS800 systems. ------------- Soldering is fun!
Posted By: enice
Date Posted: February 20, 2014 at 11:30 PM
If I am not mistaken the CS800 should be 2 way D2D Compatible. Also, you must make sure the system is set for tach. By default, the system is on voltage mode. Set 2-4 to 2 and program tach.
-------------
Eric
Audiomaxx
528 East Fordham Road
Bronx NY 10458
Compustar Top Gun Dealer Award 2012-2013
Posted By: co_ne_dub
Date Posted: February 21, 2014 at 9:28 PM
Thanks! We will get it back Monday morning to fix the issue
Posted By: blanx218
Date Posted: February 21, 2014 at 10:10 PM
The only issue I've had with 2way d2d on 600 brains is anything with a red line on the idatalink diagram. i.e. tach, brake, etc. Doesn't sound like a d2d issue. Does the security light flash when it fails to start?
Posted By: enice
Date Posted: February 23, 2014 at 11:00 PM
I just confirmed last night that the CS800 is indeed 2-way compatible.
blanx218... when you do see the red lines it means that its only compatible with "2-way" hence why it didn't work on the 600 brain. The 600S and 700S are "1-way' only.
-------------
Eric
Audiomaxx
528 East Fordham Road
Bronx NY 10458
Compustar Top Gun Dealer Award 2012-2013
|