Print Page | Close Window

Toad alarm help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13612
Printed Date: July 23, 2025 at 2:15 PM


Topic: Toad alarm help

Posted By: selblock
Subject: Toad alarm help
Date Posted: May 16, 2003 at 4:29 PM

hi guys,

new on here, i need some help installing a toad alarm to my vauxhall astra merit.

the alarm is a TOAD A201 TC

and gen would be apperciated, a wiring diagram a savour!

cheers, chris




Replies:

Posted By: draasch
Date Posted: May 17, 2003 at 6:44 AM
sorry, i dont know if anyone from the states have heard of that car.......

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: tdsecurity
Date Posted: June 10, 2003 at 12:12 PM

i have the following wire colours and where to connect them

from toad box blue red stripe is for open central lock pulse connects into car loom

from toad box grey red stripe is for close central lock pulse connects into car loom

two wires coming out of box not from connector are for your imobiliser (both black) cut into fuel pump + in car loom

black green stripe is neg- to your headlights

black white is your + to headlights

green red stripe and white is a auxillary output i have used this to cut into my ignition barrel live wire to disable it(stops black boxing). you will need to use a relay as the load from the auxillary is only 5 amps and your ignition is a 25 amp circuit. this is just a extra to have 2 imobiliser circuits instead of 1.

green black stripe trying to find out what this does

black white stripe trying to find out what this does

hope this is some help

tim


Print Page | Close Window