viper 4704 lock issue
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136135
Printed Date: May 31, 2024 at 6:40 PM
Topic: viper 4704 lock issue
Posted By: chaos6401
Subject: viper 4704 lock issue
Date Posted: February 23, 2014 at 5:30 PM
I connected a Viper 4704 with DBALL2 to a 2012 Honda Odyssey. I used the W2W method and connected the locks wires to the DBALL2. The lock button works when all doors are closed but not when you have a door open. If a door is open and you hit lock it will beep and the control will flash 3 lights.
Keep in mind that on my factory key fob lock does not work at all when doors are open, only when they are closed. Can anyone explain what is going on here? Should i be able to lock my doors when i have a door open? Thanks in advance
Replies:
Posted By: harryharris
Date Posted: February 23, 2014 at 5:59 PM
No there's a cut-out when the doors are opened and/or a key is left in the ignition (keysense).
-------------
Test before boxing up.
Posted By: chaos6401
Date Posted: February 23, 2014 at 6:33 PM
Ok, great. so this is expected to work. When i hit lock with the door open i notice that my remote says it is locked but in reality it is not. Any reason for this ?
Posted By: harryharris
Date Posted: February 23, 2014 at 6:36 PM
That's because it acknowledged you've locked it but maybe you haven't connected a door trigger?
Does the 4704 need a door trigger, may be the DB-ALL isn't giving you one and you need to hardwire it.
-------------
Test before boxing up.
Posted By: harryharris
Date Posted: February 24, 2014 at 8:06 AM
Out of interest is this a trick question?
Why on earth would you want to press the lock button when the doors are open anyway?
-------------
Test before boxing up.
Posted By: chaos6401
Date Posted: February 24, 2014 at 9:01 AM
The DBALL has a Door Status wire and I hooked that up to the status output wire on the the Viper box. Now that i am thinking about this, should the door status wire from the DBALL be connected to the door trigger input?
This is not a trick question. I know that on my car that has remote start i can click lock when the door is open and it will beep. Then once it detects the door is closed then i locks automatically.
Posted By: harryharris
Date Posted: February 24, 2014 at 9:03 AM
Door status wire either ignore if D2D, connect to green NEG (-) door trigger input on R/S.
And that's your answer.
-------------
Test before boxing up.
Posted By: chaos6401
Date Posted: February 24, 2014 at 9:22 AM
actually i am already hooked up like this
Viper H2/6 Green Wire (- door input) : DBALL2 GREEN / WHITE (-) Door Status Output.
Does this sound right? Also should the remote tell me when the doors are open? I am not seeing that.
Posted By: harryharris
Date Posted: February 24, 2014 at 9:24 AM
Check to see that wire goes to ground when a door is opened.
-------------
Test before boxing up.
|