viper 4105v and dball2

Working with a Viper 4105v remote starter with a Dball2 on a Ford Focus 2010 ses with factory alarm. (+)Keysense wire from Dball2 looks like a diode is placed inline on way to Keysense wire at ignition, according to the Dball2 installation guide. After this connection is made from the Dball2 to the ignition keysense wire is it still necessary to make a connection from remote starter to the factory alarm disarm wire on vehicle or does the Dball2 take care of disarming the factory alarm. If the -200ma light green with black wire from the Viper 4105v remote starter still needs to be hooked up to the vehicle disarm wire will a relay be needed.

Thanks

-------------
Dc10

IIRC that vehicle disarms when it see's ignition and keysense or accessory. When you unlock it will pulse the ignition, so don't freak if you see the gauges and dash light up when you unlock the doors.

I guess I didn't really answer your question. No you don't need to hookup disarm in the vehicle, it only disarms through the factory remote. The BROWN / red (ignition) and brown (keysense/accessory) on the dball will take care of it.

Thanks for the infor. much appreciated.

-------------
Dc10