2003 mazda 6s, factory arm/disarm wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136312
Printed Date: May 05, 2024 at 3:03 AM
Topic: 2003 mazda 6s, factory arm/disarm wire
Posted By: takingpoop
Subject: 2003 mazda 6s, factory arm/disarm wire
Date Posted: March 21, 2014 at 7:31 AM
Hi, first time installed a alarm. Everything is working well nothing has exploded yet. except i dont have the oem arm/disarm. Diagrams show it as a blue wire at door lock module i got 2 blue w/ silver dashes no straight blue wire at the door lock module. I tried both and both either stop power lock from working or cause power lock function to go crazy. I have two relays one for lock and arm with 1400 resistor, other for unlock disarm. Lock unlock work but cant figure out blue oem arm/disarm wire. Thanks if any one can help.
Replies:
Posted By: wirewise
Date Posted: March 21, 2014 at 5:13 PM
The factory arm/disarm wire is blue (-) as you said and is located in the driver's side kick panel (or the door lock module). If you still can't find it, you can always use the key sense wire (WHITE/ blue (+)) in the ignition harness to disarm the factory alarm. I don't remember if it arms via the power lock or not.
Posted By: takingpoop
Date Posted: March 23, 2014 at 2:07 PM
Actually thanks atons bud, i was getting ready to smash that alarm in frustration. I thought about your last sentence were power lock would do both arm/lock and unlock disarm. The lt grenn jus lock/unlock no arm/disarm. And thought instead of trying both lt grn & blue just try one of the blues. And sure enough one of the blue wires unlock /lock, Arm disarm. Thanks! you saved another alarms life today.
|