Print Page | Close Window

evo all, 2013 toyota rav-4 h-key

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136328
Printed Date: May 02, 2025 at 11:58 AM


Topic: evo all, 2013 toyota rav-4 h-key

Posted By: monti755
Subject: evo all, 2013 toyota rav-4 h-key
Date Posted: March 24, 2014 at 10:15 AM

First I like to thank any help in advance.

Project: TOYOTA RAV-4 2013 H-Key.
Canbus Interface: Fortin EVO-ALL.
H-Key Inmobilizer Control: Key in a BOX.
Alarm system with Remote Start and Data-Link port.

I only need the Canbus Interface nothing else for:
Lock
Unlock
Arm
Disarm
Trunk(open)
Tachometer
Door Status, Trunk Status, Hand-Brake Status, Foot-Brake Status.

Questions:

1.- Sincé I am using the Key in a Box Solution for the Inmbobilizer Control, do I need the TX/RX Connection?
2.- What for is TX and RX Usefull?

Installation Diagram:



Replies:

Posted By: monti755
Date Posted: March 24, 2014 at 10:25 AM
Installation Diagram:

posted_image



Posted By: harryharris
Date Posted: March 24, 2014 at 10:25 AM
Just checked, Fortin EVO-ALL doesn't support your vehicle, much easier to hardwire and use a key in a box.

-------------
Test before boxing up.


Print Page | Close Window