fortin evo all
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136339
Printed Date: May 20, 2024 at 7:54 PM
Topic: fortin evo all
Posted By: monti755
Subject: fortin evo all
Date Posted: March 26, 2014 at 8:11 AM
Why does the Tachometer Signal Die after you switch you A/T from Parking to R or D. What can cause this signal to die.
Replies:
Posted By: kreg357
Date Posted: March 26, 2014 at 8:23 AM
Never even thought about it. I always use the EVO-ALL's Tach signal output for remote starting only. The vehicle is no longer under remote starter control after you step on the Brake Pedal to move the transmission shifter out of Park, so the remote starter doesn't need the Tach Signal any more.
-------------
Soldering is fun!
Posted By: harryharris
Date Posted: March 26, 2014 at 9:29 AM
The EVO-ALL isn't listed for the vehicle you previously mentioned, thus the software may be corrupted. Hardwire the tach from pin 9 on your OBD ll socket. Though I suspect some other cause for the engine to die.
As I mentioned in an earlier thread this Toyota is far simpler and more reliable hardwired.
-------------
Test before boxing up.
|