98 chev truck power lock problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13637
Printed Date: May 13, 2025 at 6:34 PM

Topic: 98 chev truck power lock problem

Posted By: cool_greg
Subject: 98 chev truck power lock problem
Date Posted: May 17, 2003 at 11:46 AM

Here is my problem, installed a remote starter in a 98 chev pickup (no keyless entry), Autopage 610. The starter part works great.

The problem is that both the lock and unlock wires going to the door (not the starter) both rest at -12v and don't change to +12v until the door lock switch is pushed, so if I hook up the starter lock wire and press the button on the remote it blows the fuse.

So any easy solution? Or do I have run a bunch of extra wire thru to the door to di it

Many thanks

Greg

Replies:

Posted By: draasch
Date Posted: May 17, 2003 at 11:56 AM

Power Lock L BLUE DRIVER KICK #203
Power Unlock WHITE PANEL ** #202

** Without OEM Keyless Entry See Note #203.
#203 - See Reversal Rest At Ground Door Lock Diagram

you will need a couple of relays. look to the left of this post under secuirty then door locks for the diagram....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: auex
Date Posted: May 17, 2003 at 2:11 PM

Here is the diagram

posted_image

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: cool_greg
Date Posted: May 18, 2003 at 8:11 PM

Thanks for you help guys, but i've got a couple of more questions

1)anyone know what the wire colors are for the power lock motors?

2) Can I splice in the relays required right by the power lock switch so it will operate both the lock on both doors

Thanks

Greg

Posted By: auex
Date Posted: May 18, 2003 at 8:32 PM

The wire colors are in the first reply to this and if you wire them correctly then it will work both doors because the wire is the same for all of the doors.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.