viper 5704 remote start wire harness
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136564
Printed Date: May 03, 2024 at 8:43 AM
Topic: viper 5704 remote start wire harness
Posted By: scotts530
Subject: viper 5704 remote start wire harness
Date Posted: May 04, 2014 at 11:14 PM
Hello everyone I bought a viper 5704 alarm about a year ago and just now getting ready to install it but somehow Imisplaced the remote start harness. It's it possible to use this alarm without it? I didn't plan on using the remote start.
Replies:
Posted By: howie ll
Date Posted: May 05, 2014 at 12:17 AM
Yes as long as a wire is substituted for ignition 1 pink.
Can be a thin gauge, solder or faston.
Take the unit, look at the white H3 socket, it's bottom right.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: scotts530
Date Posted: May 05, 2014 at 2:11 PM
Ok so your saying I could use a female wire connector and connect it to the H3/1 ignition 1 input/output pin.and it is the bottom right connector?
Posted By: howie ll
Date Posted: May 05, 2014 at 2:15 PM
Yes.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|