bitwriter software
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136565
Printed Date: April 25, 2024 at 2:07 AM
Topic: bitwriter software
Posted By: t&t tech
Subject: bitwriter software
Date Posted: May 04, 2014 at 11:20 PM
Which version of the bitwriter chip is required to program the newer viper remote starts? Using my bitwriter on a viper5704 today and i got a not a valid system response.
Thanks in advance.
Replies:
Posted By: howie ll
Date Posted: May 05, 2014 at 12:15 AM
Bet you didn't ground the green H2.
5X01-6 are the same Darren.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: t&t tech
Date Posted: May 06, 2014 at 12:43 PM
Talkin about the bitwriter chip howie. I did end up programming via valet switch. But i still want the info.
Posted By: howie ll
Date Posted: May 06, 2014 at 12:46 PM
Without opening mine I think it's v. 2.7.
I'll know in 10 minutes when I get delivered a 5906 on a grey import.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: May 06, 2014 at 4:18 PM
2.9 Works on all the 06 models.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|