DEI 552T installation

I'm about to install a DEI 552T remote start into my car and I have no clue where this one wire goes. It's an orange wire on the main harness going to the starter kill relay, (-500mA) ground when-armed output. It doesn't seem like it came with a starter kill relay. This is probably one other thing the seller left out of the box. Be aware of who you are buying from off of EBAY.
My seller left out just about every harness even the antenna.

Also, will it be okay if I leave out the toggle override switch in the 6-pin remote start harness? I'm afraid that my dad will not like having to flip the switch in order to start the car manually.

Thanks for your help.

First off you don't need to flip the switch to start the truck manually. The switch is called a togle override, basicly if you use it just disables the remote start. I just usally just throw it out and wire the BLACK/ white wire to ground. The orange wire is a ground when armed wire, on the 552t it does not come with a relay for a starter kill becuase the 552t is not an alarm. What it is manily used for on this model to run things like a power window control so when you lock your car the windows roll up.

Hei themagicone :) not good to throw it out ... what if you borrow the car to somebody an they start playing with the remote ?

themagicone, so basically I don't have to connect the orange wire to anything; I can just tape it up.

Thanks.

The orange wire is used to hook up a starter kill and it also enables the anti-grind feature. No it is not an alarm but when you lock the doors with the remote in enables the starter kill. If you have a relay take the extra two minutes and hook it up.