2006 f350 with viper 5706v
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136645
Printed Date: May 08, 2024 at 8:42 PM
Topic: 2006 f350 with viper 5706v
Posted By: hondoflatty1
Subject: 2006 f350 with viper 5706v
Date Posted: May 14, 2014 at 7:24 PM
Hello, new guy here. I've installed the 5706v to mostly complete. Security and Remote start work. I'm a first timer, 15 year journey level mechanic and I've got to say this has to be the biggest PITA ever. I won't bore you with all the things that I have had to learn by reading and trial/error. I have done all the research without posting and cluttering the forum.
I have 6 wires left that I'm not sure of. They very well may not get used but I just don't know. They are all on the Aux/Trig/Shutdown 24 pin harness.. They are as follows.
#1 Pink/White (-) 200mA Ign 2/Flex OUTPUT
#5 Dark Blue (-) 200mA STATUS OUTPUT
#11 WHITE/ Blue ACTIVATION INPUT
#17 Pink (-) 200mA IGN 1 OUTPUT
#21 Violet / YELLOW (-) 200mA STARTER OUTPUT
#23 Orange (-) 200mA ACCESSORY OUTPUT
Any help on these 6 wires would be greatly appreciated!!
Furthermore, if there are any of you newbies out there doing this exact setup and are having trouble, don't hesitate to ask. I am by no means an expert but, as with most things, once I have done one specific application I can help others with it down the road (aka.. I cannot help you put this alarm on a Sebring haha). Now that I am done with it I do understand what others say, this truck is pretty simple doing the basic installation. I have learned that alarms are very daunting for those of us that have never done one.
Thanks again to the vets for any help!!
-------------
Here for help.
Replies:
Posted By: howie ll
Date Posted: May 14, 2014 at 7:41 PM
If the R/Start works you need none of them.
Tape up and ignore.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: hondoflatty1
Date Posted: May 15, 2014 at 2:52 PM
Great, thanks!! Wasn't sure if they controlled/signaled something else for the alarm module or not. I will tie them up and move on.. last wire to suffer in, brake signal, and I'm done..
-------------
Here for help.
Posted By: hondoflatty1
Date Posted: May 15, 2014 at 2:53 PM
*solder
-------------
Here for help.
Posted By: howie ll
Date Posted: May 15, 2014 at 3:53 PM
No, as a COPD patient, let me assure you that solder (lead based) = suffer. 😉
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|