comfort closure
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136656
Printed Date: May 19, 2024 at 10:24 AM
Topic: comfort closure
Posted By: drscrane
Subject: comfort closure
Date Posted: May 16, 2014 at 7:32 PM
I have installed a viper rke in my 86 f series thanks to the diagrams on this site, thank you. There is no ''comfort closure'' feature on this system, and don't really want another box under the dash, nor do I want to spend another $50. Somewhere I saw a diagram of someone who used a double relay and diode setup to trigger the windows to roll up when the vehicle is locked, has anyone done this or know where I can get ahold of a diagram that will show me how to achieve this......?
-------------
SCrane
Replies:
Posted By: howie ll
Date Posted: May 17, 2014 at 12:09 AM
PM Oldspark
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: oldspark
Date Posted: May 17, 2014 at 3:06 AM
No...!
Unless there is an auto windup already, hence just a trigger in parallel with the existing switch, etc.
Posted By: howie ll
Date Posted: May 17, 2014 at 3:18 AM
I referred it back to you Peter because I was sure it can't be done.
Come to think of it inbuilt comfort or total close only came in on Euro vehicles around 1990 (BMW, Mercedes, Opel{Holden/Vauxhall} and VW).
No US, no Japanese and certainly no trucks.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: oldspark
Date Posted: May 17, 2014 at 5:43 AM
So are you saying my 08M2 auto-close - with auto stop & soft start - is a commercial product?
Geez man, I still haven't built my 1980's CAS-less self-learning ignition (let alone its 2005 variant - the self learning EMS...).
ATM I'm too busy replacing my wiper mechanism, and seeking a new "job".
And drinking!
Posted By: howie ll
Date Posted: May 17, 2014 at 6:14 AM
Think what you might achieve without the booze.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: oldspark
Date Posted: May 17, 2014 at 11:22 AM
No! Not reality!
Trouble is I still think on the booze.
Problem is my fingers have great issue communicating such thoughts.
But I'll blame YOU (Howard) - I just returned from a Poison Idea gig - a band from YOUR environs.
But the booze is a temporary condition anyhow - I'm not fiscal enough for its persistence.
Howie-ever, you advice as always is so correct.
Posted By: howie ll
Date Posted: May 17, 2014 at 11:44 AM
😛
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: oldspark
Date Posted: May 17, 2014 at 8:53 PM
Ooops - Poison Idea are from Portland Oregon.
Oh well, close enough...
|