falcon alarm problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136674
Printed Date: July 14, 2025 at 11:50 AM

Topic: falcon alarm problem

Posted By: ruru
Subject: falcon alarm problem
Date Posted: May 21, 2014 at 4:44 PM

I have a falcon car alarm and I don't know model # BUT MY PROBLEM IS THAT WHEN I CONNECT MY SIREN IT STARTS BEGINS TO MAKE NOISE AND I CANT SHUT IT OFF SO I DISCONNECT THE ALARM.

-------------
Ruben Garcia

Replies:

Posted By: racerjames76
Date Posted: May 22, 2014 at 7:37 AM

Without knowing what model alarm (factory installed or aftermarket) we cant offer much help, but most aftermarket alarms can be disabled by turning the ignition on while holding a valet button.

Factory alarms can be disarmed by turning the key in the door lock, turning the car on, or using the factory remote.

Also make sure your remote fob has fresh batteries.

Otherwise we need more information to further help. posted_image

-------------
To master and control electricity is perfection. *evil laugh*

Posted By: howie ll
Date Posted: May 22, 2014 at 4:47 PM

All Codes will do this when powered up, simply turn on the ignition first or turn it off via the remote.
That or the alarm is a POS or the siren if it's neg switching has a short.
Why are we answering, not enough info from the OP.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window