Help GEM Module on Ford

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13674
Printed Date: May 13, 2025 at 8:20 AM

Topic: Help GEM Module on Ford

Posted By: Jamieh560
Subject: Help GEM Module on Ford
Date Posted: May 18, 2003 at 1:55 PM

I installed a Viper 300esp on a 97 ford explorer and I'm getting the false alarm 45 minutes after its been alarmed. I got the dioides on the door triggers. I know its the Gem and the power save reley, but don't no what wire to cut and add dioide at the gem module. I could should use any info I can get, its about to drive me crazy! Thanks

Replies:

Posted By: cpgoose
Date Posted: May 19, 2003 at 9:33 AM

You might want to check out this post.

I did a search on GEM in the forums, and this is what I got.

Print Page | Close Window