toad security compact c1 alarm system

Hope someone can help me with this. I bought a Toad Security Compact C1 Security System but it does not have a wiring diagram with it. The alarm came in a tube and has 2 remote fobs, the siren which has the following coloured wires coming from it:
black and green
black and white
black (thin)
black (thick)
brown and white
red and white
grey and white
orange
yellow
red
green
and an independent grey wire
12 wires in total. I need to wire this into my van but don't know where to start. I have googled and googled and can't find any help online so this site was suggested. If anyone has a wiring diagram would you mind sharing it with me. Many thanks


-------------
Angie

Can't help with all of the wires, it's a good 15 years since I used to install them. That's how old they are!
Try Googling Scorpion Alarms they have the rights to Toad nowadays, they probably have the instructions in their archive.
BLACK/ green and BLACK/ white, indicators.
Red power, check the blacks with a DMM if they are common, both are earths.
Indie grey wire is for a boot/hatch switch.
Two points;
a) There's probably no one else on this forum who's even heard of the product, it's actually a cheap Viper from the same factory with better quality wiring.
b) It will help with future requests if you tells us make model and year of van.


-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Phone General Enquiry: +44 (0)1257 249928 and ask them to blow the dust off and email you an install guide.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Thanks will give it a go

-------------
Angie