viper 4706v guide
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136864
Printed Date: May 14, 2025 at 8:53 PM
Topic: viper 4706v guide
Posted By: carzynfr
Subject: viper 4706v guide
Date Posted: June 23, 2014 at 11:04 PM
I looking for installation guide for viper 4706v
Replies:
Posted By: kreg357
Date Posted: June 24, 2014 at 4:21 AM
Here you go, the Viper 4706V Install Guide, courtesy of Mr. Smokeman  :
https://www.the12volt.com/installbay/file.asp?ID=1270
------------- Soldering is fun!
Posted By: carzynfr
Date Posted: June 25, 2014 at 12:25 AM
I try to donwload it from this forum but won't work
Posted By: kreg357
Date Posted: June 25, 2014 at 3:15 AM
Same thing is happening to me.  Not sure what is wrong. Perhaps the Mods or Site Admin can assist... ------------- Soldering is fun!
Posted By: rajubhai55
Date Posted: July 26, 2014 at 8:31 AM
I also need guide for 4706V but the link does not work. can somebody help us?
-------------
Raj the great
Posted By: the12volt
Date Posted: July 26, 2014 at 12:18 PM
The file is corrupt and will be removed shortly. -------------  the12volt • Support the12volt.com
Posted By: manbear1
Date Posted: February 28, 2015 at 9:17 PM
I am looking for viper 4706v install guide
-------------
JAMES T WHEELER
Posted By: howie ll
Date Posted: March 01, 2015 at 5:10 AM
Look at any DEI 5X04 the wiring is all the same.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: March 01, 2015 at 5:16 AM
Just uploaded it. Look in Downloads/Manuals section, alarm manuals.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: kreg357
Date Posted: March 01, 2015 at 7:26 AM
Thank you, Howard!  Here is the link : https://www.the12volt.com/installbay/file.asp?ID=1318 ------------- Soldering is fun!
Posted By: jnorris630
Date Posted: January 01, 2017 at 6:18 PM
I want to install the 4706v on a 93 silverado. Not sure what wires are for the lock. I do not believe the uploaded diagram shows this. Thanks
John
-------------
jnorris
Posted By: matthewwanderso
Date Posted: November 05, 2017 at 8:01 AM
Hey guys new here. Have electrical experience. Industrial electrician by trade IBEW760. Not completely dumb with electric. But control work is not my favorite.
I'm using a viper 4706v on an 05 Avalanche.
Do I actually need H4 and H5 and where do I put the when armed output H6?
And would I be right to assume that I do not need the door lock or the 24 pin auxiliary shut down harness since I'm using D2D?
I may be way wrong but my thinking is with the dball2 you lose a whole lot of the connections that have to be made because it is made through the data port and told to do it by the computer.
Posted By: matthewwanderso
Date Posted: November 05, 2017 at 8:03 AM
And I apologize in advance if I put this in the wrong place. I've been staring at Pages all weekend long trying to figure out do I use relays do I not do I use diodes do I not do I need half of the wires in this kit the way it looks I'm thinking I need about 8 connections and I probably have about 50 wires.
|