compustar poc programming via computer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136870
Printed Date: May 16, 2025 at 12:32 AM

Topic: compustar poc programming via computer

Posted By: shafferny
Subject: compustar poc programming via computer
Date Posted: June 24, 2014 at 7:38 PM

Not that I have any immediate need but I'm just curious. Can you change the programmable output channels on a CM6200 if you have the controller plugged into your PC with a Blade installed using I idatalinks website? I realize most installers use the OP500 for programming POCs. I'm just curious if it can be done that way.

-------------

Replies:

Posted By: kreg357
Date Posted: June 24, 2014 at 8:17 PM

Yes, you can change to POC types via the WebLink. posted_image You can even do it without a Blade cartridge plugged in. Use this WEB site :

https://compustar.idatalink.com/weblink/

-------------
Soldering is fun!

Posted By: shafferny
Date Posted: June 24, 2014 at 8:36 PM

Thanks Kreg. That's pretty cool!

Print Page | Close Window