ford escape 2005 factory alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137051
Printed Date: May 05, 2025 at 8:10 PM

Topic: ford escape 2005 factory alarm

Posted By: nchicas
Subject: ford escape 2005 factory alarm
Date Posted: August 05, 2014 at 12:26 AM

Im trying to install a compustar cs700-A in a Ford Escape 2005, the kit contains an alarm and a keyless entry. Haven't installed it yet because I'm afraid it would trigger the factory alarm, Do I disarm the alarm or how do I install the new one without triggering the factory alarm?

-------------
Nchicas, confused installer

Replies:

Posted By: kreg357
Date Posted: August 05, 2014 at 4:18 AM

This Pictorial on a 2005 Mercury Mariner should help, the Mariner & Escape are "sister" vehicles. See Notes 2 & 4 for detailed info on
the locks / alarm wiring. https://www.the12volt.com/installbay/forum_posts.asp?tid=135376

The Pictorial uses a Compustar CS600-s. This unit is only a remote keyless entry with remote start system and
does not have any alarm capabilities & does not monitor the vehicles' doors or rear hatch.

-------------
Soldering is fun!

Print Page | Close Window