Print Page | Close Window

nissan altima, shock sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137084
Printed Date: May 13, 2025 at 7:00 PM


Topic: nissan altima, shock sensor

Posted By: cloud9.214tex
Subject: nissan altima, shock sensor
Date Posted: August 10, 2014 at 3:20 PM

i have a 2011 altima and want to hook up dei 504d shock sensor. Since i was unable to find a 12v wire that turns on when i lock my doors to use to power the shock sensor I was wondering if it would be a good idea to use my igniton wire as a ground,since is grounded when the car is off and is positive when the car is on? any input is greatly appreciated...
Thank u



Replies:

Posted By: howie ll
Date Posted: August 10, 2014 at 5:30 PM
Perfectly OK.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.



Posted By: cloud9.214tex
Date Posted: August 10, 2014 at 5:58 PM
ok i really appreciated.


Print Page | Close Window