504c and 506t wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137085
Printed Date: May 14, 2025 at 1:16 AM

Topic: 504c and 506t wiring

Posted By: rt4x4
Subject: 504c and 506t wiring
Date Posted: August 10, 2014 at 6:15 PM

I am wanting to ad a 506t to my Clifford 50.5x which has a 504c shock sensor,the harness that comes with the 506t wont fit the 504c,I am using the blue instant trigger wire at the end of the connect of the 504c that connects to the alarm for a 520d What is the best way to wire this,Thanks

Replies:

Posted By: catback
Date Posted: August 10, 2014 at 7:33 PM

Make it like the diagram on page 2 (you might need to splice wires together)

https://www.directeddealers.com/manuals/ig/accessories/N506T.pdf

Posted By: rt4x4
Date Posted: August 10, 2014 at 9:33 PM

Thank you, will I need to diode isolate the sensors?

Posted By: catback
Date Posted: August 10, 2014 at 11:56 PM

Refer to the diagram, both sensors will be on their own trigger wire (green or blue)

Print Page | Close Window