alpine sec-8027 remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137257
Printed Date: May 14, 2025 at 1:31 AM

Topic: alpine sec-8027 remote

Posted By: knellphil231
Subject: alpine sec-8027 remote
Date Posted: September 14, 2014 at 5:32 PM

Hey Folks,

I was wondering if anyone on here was familar with the remotes for the alpine SEC-8027 alarm system.

I have that system, and have only one working remote. I purchased a couple of used remotes from a website, but they don't appear to be set to the frequency of my system...

Was wondering if anyone had any idea on how to adjust the remotes I brought to the frequency of my system.

Thanks

Replies:

Posted By: oldspark
Date Posted: September 15, 2014 at 7:32 PM

If they use a "binary" or pin coded chip, open up the units and break & relink the appropriate pins.

If a serial bit encoder, get new chips & duplicate the bit pattern - tho buying new remotes from the supplier may well be simpler or cheaper.

Posted By: Ween
Date Posted: September 15, 2014 at 8:41 PM

Hi,
Search SEC-8027 on the site here, the question of remote programming has been answered before.

Posted By: knellphil231
Date Posted: September 16, 2014 at 9:04 AM

Found it thanks!

Print Page | Close Window