ads tb

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137299
Printed Date: May 12, 2025 at 2:58 PM

Topic: ads tb

Posted By: ziggyb222
Subject: ads tb
Date Posted: September 21, 2014 at 10:24 AM

I have a Idata ADS TB module. I want to use it on a 08 Tundra to do locks and transponder...I think the firmware is ADS TB Tl??? Does that do everything? I cant access Idatas site right now for some reason...Thanks!!!!!

Replies:

Posted By: kreg357
Date Posted: September 21, 2014 at 1:04 PM

The ADS TB flashed with the ADS TB TL firmware will only handle the transponder bypass function for that truck.

You will need an ADS AL-CA for both locks & transponder. This module will also supply door status, brake status and a Tach signal.

In the practical application, the truck is very easy to do with just the ADS TB and hard wiring the rest.

-------------
Soldering is fun!

Print Page | Close Window