2000 galant, starter interupt

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137407
Printed Date: May 12, 2025 at 8:36 AM

Topic: 2000 galant, starter interupt

Posted By: lucasoil4u
Subject: 2000 galant, starter interupt
Date Posted: October 08, 2014 at 8:31 AM

How to wire a relay to interrupt the starter kill wire? SOOO Tired. Thanks 2000 galant for the remote start

Replies:

Posted By: catback
Date Posted: October 08, 2014 at 8:56 AM

Why would you want to interrupt the starter kill wire? If it's to disable the starter kill so the car will remotely start you simply need to wire the remote start to bypass the starter kill - connect starter wire after/downsteam of the starter kill not before/upstream of it.

Posted By: lucasoil4u
Date Posted: October 08, 2014 at 9:04 AM

When doing remote start on vehicles with factory alarm, must also interrupt the blue/red (-) key sense wire at the steering column using the status output wire to bypass the factory starter kill.

Posted By: catback
Date Posted: October 08, 2014 at 9:48 AM

See https://www.the12volt.com/relays/relaydiagram10.html

Substitute your keysense wire for the starter wire, and your status wire in place of the alarm armed output.

Posted By: lucasoil4u
Date Posted: October 10, 2014 at 11:00 AM

Thanks was so very tired.

Print Page | Close Window