viper 4105v diesel issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137627
Printed Date: May 10, 2024 at 11:30 AM

Topic: viper 4105v diesel issue

Posted By: richco
Subject: viper 4105v diesel issue
Date Posted: November 09, 2014 at 3:18 AM

Hi All,
I just bought viper 4105v for my 2001 dodge ram diesel automatic, when I looked the wiring diagrams there is no wait to start wire how I can wire this remote starter please help me or I do have to buy diffrent one with the wait to start option please need help.
Thanks

Replies:

Posted By: howie ll
Date Posted: November 09, 2014 at 4:19 AM

Quick reference guide that came with the unit:-
Menu 2
Feature 10
Option 2
Or if you have access to a bitwriter, you can do it in one second intervals.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: richco
Date Posted: November 09, 2014 at 11:31 AM

Thanks for your reply this is my first time I am trying to install remote starter and trying to gather all the info what I can, as you said about the option 2 so all the setting in option to done by the remote starter or by the bitwriter please explain me.
Thanks

Posted By: howie ll
Date Posted: November 09, 2014 at 4:07 PM

The option mentioned gives you 15 second delay, if you had access to a bitwriter you could change that time to say 3 seconds.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: richco
Date Posted: November 09, 2014 at 7:16 PM

Thanks, to do programming for delay does it can be done by remote starter only like thay have explain in instruction, or I still need bitwriter.In alberta we get realy cold so I would like to let engine finish it glow plug cycle before it start.

Posted By: smokeman1
Date Posted: November 09, 2014 at 8:46 PM

Setting the delay can be done with the remotes for 15, 30, or 45 seconds. If you had access to a bitwriter, the delay can be set 1 second to 90 seconds. example 37 seconds.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: richco
Date Posted: November 09, 2014 at 10:33 PM

Thanks for reply, could you please guide me for wiring connction I got confuse on some wires.

2001 dodge ram 2500 diesel automatic.
Thanks

Posted By: howie ll
Date Posted: November 10, 2014 at 12:34 AM

Yes, list your wires and where you've connected them.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: richco
Date Posted: November 11, 2014 at 10:05 PM

Need help on these wires ,
MAIN HARNESS 9 PIN
1...light green black.....-200ma factory alarm disarm ?where to connect.
2...GREEN / WHITE............-200ma factory alarm rearm ? ,,,,,,,,,
3....yellow......................+ ignition out(to alarm).............?,,,,,,,,,
4.....WHITE/ blue................(-) activation input...................?,,,,,,,,,
5.....orange.......................(-) 500ma ground when locked/anti grind output....? ,,,,,,
6......brown.......................(-)200ma horn output.......? ,,,,,,,,,,,,,,
7......RED / white................. (-) 200ma trunk release output.....?,,,,,,,,,,,
8......black..........................ground..I have connected to the ground
9......white.........................(+/-) light flash output...........?,,,,,,,,,,,,,
I have connect the other wires as instructed but I only connected ground wire from main harness, after putting all of these wire I try to run to detect tech signal, but see no light on the remote starter at all I am only installing remote starter features please help me with the instruction.my truck is diesel I found the tach wire on engine firewall this is gray/black wire and shows 3.15 volt ac when started.
Thanks