2014 gmc sierra key in coffin
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137628
Printed Date: May 20, 2024 at 11:17 AM
Topic: 2014 gmc sierra key in coffin
Posted By: jlysak
Subject: 2014 gmc sierra key in coffin
Date Posted: November 09, 2014 at 8:38 AM
Anyone tried it or know if a key in the box bypass would work on a 2014 sierra? Is there a wire magic document on how to bypass the factory transponder keys as they had for all GM's previous versions of Passlock?
Reason I ask is I did one on a model without on star using a idata module - lot of pre wiring - might be an easier way?
Replies:
Posted By: chev104275
Date Posted: November 09, 2014 at 9:41 AM
Key in a box won't work. The key in a box bypass is made for keys that are RF transponder based. The passlock system is resistance based from the lock cylinder not the key. To me the idatalink stuff is some of the best/most reliable bypasses
-------------
If i Can't Install it I Don't need it Joe
Posted By: jlysak
Date Posted: November 09, 2014 at 9:55 AM
Ya, as far as I know the last version (circle plus) was both rf and resistant based. Would this version be the same?
Wire magic has a diagram on how to bypass those... Need a key in the box and passlock bypass (07-13)
Posted By: chev104275
Date Posted: November 09, 2014 at 10:16 AM
Passlock 3 is both rf and resistance based the idata module takes care of both
-------------
If i Can't Install it I Don't need it Joe
|