no start w key only with remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137693
Printed Date: May 05, 2025 at 9:17 PM

Topic: no start w key only with remote starter

Posted By: yachtman
Subject: no start w key only with remote starter
Date Posted: November 15, 2014 at 8:00 AM

2006 Subaru tribeca

Installed a bulldog RS83B

Starts great with the remote start

Now it will not start with just the key.

I'm really stumped??

Snowing in Spirit Lake

Replies:

Posted By: pentavolvo
Date Posted: November 15, 2014 at 8:18 AM

Checked for blown fuse possibly

Posted By: kreg357
Date Posted: November 15, 2014 at 9:11 AM

You could try unplugging the Red 2 Pin transponder loop from the RS82B brain and try to start with the key. If it works like this, it would mean that the Bulldog was always outputting the transponder signal to the antenna and the car was seeing two keys at the same time and not happy.

-------------
Soldering is fun!

Posted By: yachtman
Date Posted: November 15, 2014 at 10:10 AM

I'll give that a try.

I currently get a fast crank and no start. I had this exact issue when I first installed the remote. Bulldog sent ma a transponder loop that goes around the ignition. Installed it and remote works perfectly.

But now the key doesn't work. Unfortunately I have her all buttoned up.

Practice makes perfect. posted_image

Posted By: metz35
Date Posted: November 15, 2014 at 5:03 PM

Bypass is on constantly.
Seeing 2 keys.
Recheck the bypass

Posted By: yachtman
Date Posted: November 17, 2014 at 7:55 AM

With the no start condition.

How do I check the bypass??? posted_image

Posted By: chev104275
Date Posted: November 17, 2014 at 8:22 AM

Do like kreg all ready suggested remove they loop on the bypass and try using the key. If the key works then it's you're bypass causing the issue. How do you have your bypass wired up ?

-------------
If i Can't Install it I Don't need it Joe

Print Page | Close Window