idle mode desire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137733
Printed Date: May 14, 2025 at 4:38 AM

Topic: idle mode desire

Posted By: ricardoboston
Subject: idle mode desire
Date Posted: November 18, 2014 at 8:26 PM

IDLE MODE DESIRE can a tech explain me whats it means on the 2013 Hyundai Sonata installation thanks

Replies:

Posted By: kreg357
Date Posted: November 18, 2014 at 9:02 PM

Yes. The connection is optional. If the customer wants "Pit Stop Mode" ( aka Idle Mode ), then you must connect that wire.

-------------
Soldering is fun!

Posted By: sparkie
Date Posted: November 18, 2014 at 9:39 PM

Idle mode allows you to activate the remote starter with the vehicle already running. You activate the remote start and then take the key out. The vehicle stays running.

-------------
sparky

Posted By: ricardoboston
Date Posted: November 19, 2014 at 9:08 PM

ok so it means all the push to start cars never need this wires on the PTS buttom swicth to be connected?unless the owner whants to perform the pit stop mode ,thanks Sparkie and Kreg357

Posted By: ricardoboston
Date Posted: November 20, 2014 at 5:52 AM

ok i got it ,i see on idatalink some cars needs this wires connected i will do a 2015 toyota rav 4 i think this one don't need thanks

Print Page | Close Window