Print Page | Close Window

2014 equinox remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137752
Printed Date: May 10, 2025 at 5:03 AM


Topic: 2014 equinox remote start

Posted By: prdjr165
Subject: 2014 equinox remote start
Date Posted: November 21, 2014 at 5:22 AM

I am installing a Crimestopper RS3-G4 with a Fortin EVO-ALL w2w in a 2014 equinox 6cyl flip key...i am
unsure about the positive connection from the remote start,In the fortin diagram it shows the positive lead from the remote starter connecting to the yell/blue from the EVO-ALL then connecting to a 2amp wire at the ignition connector RS2.does a 2amp connection seem correct to anyone ?



Replies:

Posted By: metz35
Date Posted: November 22, 2014 at 8:51 PM
Yup. Equinox is a low current system. Most GMs now are low current.
I'm unsure about 12v constant amperage.
But I know the ignition is fused at 2amps.



Posted By: prdjr165
Date Posted: November 23, 2014 at 4:55 AM
thats what i figured-i have a 2007 lexus l460 next and its the same way,connect power at ignition harness with a 7.5 amp fuse.


Print Page | Close Window