ignition t-harness for 2012 honda civic?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137770
Printed Date: April 20, 2024 at 7:04 AM
Topic: ignition t-harness for 2012 honda civic?
Posted By: colpaz
Subject: ignition t-harness for 2012 honda civic?
Date Posted: November 23, 2014 at 7:11 PM
Hello all,
I've been poking around here and other places for a bit trying to find a vendor for an ignition switch t-harness for a 2012 Civic, with little success! Bulldog lists a few, with the most recent supported year listed as 2005.
Any thoughts on where to find an ignition T-harness for a 2012 Civic? This is for a remote start install, and I'd prefer to not permanently modify the heavy gauge ignition wires (especially cutting the starter wire for the anti-grind...
Thanks,
Colin
Replies:
Posted By: Chris Luongo
Date Posted: November 24, 2014 at 9:01 AM
I think the Fortin EVO-ONE should have a T-harness available for this car. I can't remember for sure if it's already available yet, but check out fortin.ca and look up your car there.
Posted By: colpaz
Date Posted: November 24, 2014 at 12:43 PM
Thanks! Looks like the Fortin thar-one-hon2 is the correct harness. Any suggestions on where to purchase Fortin products? I have calls into a few distributors at the moment.
The starter module will be a Directed DBALL2PRO with MC501 relay box and ASMC200 SmartStart cellular interface module.
Cheers,
Colin
Posted By: shafferny
Date Posted: November 24, 2014 at 2:54 PM
Is the T-harness available for just the immobilizer bypass? Kinda looks like it.
If that's the case, I think it's rather pointless. If you have to hack all the high current wires by splicing into them, why not just finish the job and do the ones involving the immobilizer harness?
-------------
Posted By: colpaz
Date Posted: November 24, 2014 at 3:24 PM
Nope, looks like it does high current + immobilizer, which is fantastic - leaves all the important factory stuff untouched. Just need to tie into locks, parking lights, OBD2, defog, and heated seats myself (the ASMC200 cell module is also a code reader, shows codes in phone app... and 2x aux circuits will be for defrost and driver's heated seat).
T-harness ref: https://fortin.ca/download/21771/evo-one_thar-one-hon2_honda_accord_(2013-2014)_-_key.rev-20141010.pdf
Cheers,
Colin
Posted By: shafferny
Date Posted: November 24, 2014 at 3:34 PM
Awesome! Good deal!
-------------
|