Print Page | Close Window

cm7200 nissan murano

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137772
Printed Date: May 13, 2025 at 4:02 AM


Topic: cm7200 nissan murano

Posted By: adamski
Subject: cm7200 nissan murano
Date Posted: November 23, 2014 at 7:51 PM

Hi currently I'm installing cw7200 with rf-p2w901-ss remote kit on 2012 murano S, so far got idatalink installed successfully, found out that there are 2 harnesses for the starter accessory and ignition, one is low current ignition harness and the other old style high current ignition harness, am I good to go with the low current harness or should I use the heavy gauge harness thank you.
any suggestions that will save me some time ill really appreciate.
Thank you.


-------------
Adam



Replies:

Posted By: metz35
Date Posted: November 24, 2014 at 4:07 PM
2012 murano is push to start.
You should be fine using the low current half of thee 7200.


Print Page | Close Window