viper 4704v wont turn off

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137856
Printed Date: May 11, 2024 at 2:53 AM

Topic: viper 4704v wont turn off

Posted By: thespinman82
Subject: viper 4704v wont turn off
Date Posted: December 03, 2014 at 11:21 AM

Question, so I have my defogger wire connect not to the switch but in a kick panel that goes to the back. My problem, my wife decided to remote start the car and while in remote start mode she presses the defogger and then the car starts beeping (Horn) continuously!. I couldn't get the remote start to turn off so I had not choice but to disconnect unit. Now when I connect all the wires back into it the car starts automatically and will still not turn off unless I remove all wire harnesses to brain. Any idea how to fix?? RESET BRAIN??

Replies:

Posted By: smokeman1
Date Posted: December 03, 2014 at 12:08 PM

First question I would ask is, what wires from the 4704 are connected to what exactly on the car. Make Model Year?

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: thespinman82
Date Posted: December 03, 2014 at 12:46 PM

That would help! The remote start worked fine before this. I had just finished installing last night until this morning I had this issue. I think its because I didn't connect the defogger wire to the actual switch?

24 pin- neutral safety
        door input (-)
        dome light output
        door input(+)
        brake shutdown (+)
        dark blue (-) Status output
        defogger(-)
6 pin - 12v constant
        ground
        honk output
3 pin- unlock/ lock output

8 pin- ignition 1 & 2
        Constant
        Accessory
        Starter

Posted By: thespinman82
Date Posted: December 03, 2014 at 12:49 PM

2009 Toyota Corolla. Im confident all of the wires are connected to where they are supposed to go EXCEPT for the defogger output which I had connected to a Black wire in a 5 pin harness in kick panel.

Posted By: smokeman1
Date Posted: December 03, 2014 at 5:36 PM

Your listing for connections are vague. I would say to disconnect the defrost connection you made. See if the problem goes away.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: thespinman82
Date Posted: December 03, 2014 at 5:52 PM

Im sorry. I did disconnect that defog wire. I feel I connect something wrong and the brain is malfunctioning. There a way to reset the brain completely?

Posted By: tedmond
Date Posted: December 03, 2014 at 6:22 PM

time to check your connections. the unit should not auto star everytime its connected,

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: thespinman82
Date Posted: December 03, 2014 at 6:38 PM

Will do. One more question for you, How do I access the program menu to change the defogger 2nd status to latched? Do you have a procedure? I can't seem to find this info anywhere.

Posted By: smokeman1
Date Posted: December 03, 2014 at 7:30 PM

If you list all of your connections from the remote starter to your car, it might give an idea what might be wrong.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: thespinman82
Date Posted: December 03, 2014 at 7:52 PM

09 corolla

24 pin:

H/1(-) 200MA FLEX RELAY CONTROL OUTPUT-- (NC)
H/2 (-) NEUTRAL SAFETY INPUT- ( HAVE THIS GROUNDED)
H/3(-) REAR DEFOGGER ( NOT CONNECTED ANYMORE)
H/4(-) ALARM/DISARM ( NC)
H/5(-) TRUNK RELASE (NC)
H/6(-) DOOR INPUT (DRIVER DOOR TRIGGER CONNECTION)
H/7(-) CONNECTED TO DOME LIGHT
H/9 (-) CONNECTED TO BYPASS MODULE
H/10 THRU H/15 (NC)
H/16- BRAKE SHUTDOWN CONNECTED
H/17 THRU H/24 (NC)

3 PIN :
DOOR LOCK/UNLOCK -CONNECTED

8 PIN REMOTE START

IGNITION 1 IS CONNECTED AS WELL AS IGN #2
12+ CONSTANTS ARE ALL CONNECTED TO CONSTANTS
STARTERS CONNECTED
ACCESSORY
FLEX REALAY INPUT( NC)

6 PIN

12+ CONSTANT
GROUND
HONK OUTPUT