2012 f150 disable alarm?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137869
Printed Date: May 05, 2024 at 7:28 AM
Topic: 2012 f150 disable alarm?
Posted By: ak609
Subject: 2012 f150 disable alarm?
Date Posted: December 04, 2014 at 3:03 PM
looking to either disable the alarm on a 2012 f150 or how to get the alarm to shut off when you lock it with the door lock and than use the viper key fob to unlock it. using a 4806 with a key box. im pulsing the ignition and key sense at the same time also tried pulsing the ground while running wire to make it see a key but still have no luck with it.
Replies:
Posted By: chev104275
Date Posted: December 04, 2014 at 4:30 PM
Need to pulse ignition and transponder
-------------
If i Can't Install it I Don't need it Joe
Posted By: ak609
Date Posted: December 06, 2014 at 12:14 PM
I actually did a little bit more research and found out that you have to pulse the accessory along with ignition and transponder on certain trim level of some of the fords.
Posted By: pentavolvo
Date Posted: December 06, 2014 at 12:15 PM
Dball will do all of this for you if I recall
Posted By: howie ll
Date Posted: December 06, 2014 at 4:52 PM
DB-ALL2 DOESN'T!
09/10 UK Ford Focus turbo diesel auto.
Went W2W, and did transponder by-pass (we need a key in a 556U for Euro models, extra immobilisation) and ignition (no ACC it's all data).
Still having the same problem, my only answer, start via R/S or remove factory alarm siren.
Tried to turn it off via a Snap On unit but I need a Ford Dealer diagnostic.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|