’09 matrix remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137917
Printed Date: May 14, 2025 at 8:13 PM

Topic: ’09 matrix remote start

Posted By: stroker351w
Subject: ’09 matrix remote start
Date Posted: December 09, 2014 at 8:55 PM

Anything I should know about doing an '09 Matrix remote start with a Viper 4105V? I'm going to us a 556UW bypass because I don't have the ability to flash a PKALL.

Replies:

Posted By: kreg357
Date Posted: December 10, 2014 at 6:12 AM

Got some good news for you. The PKALL comes pre-loaded with firmware and should be good to go right out of the box. No need to loose a key under the dash.

You might need an extra 30/40 Amp SPDT relay for the Starter2 wire if you have the 2.4 liter engine.

-------------
Soldering is fun!

Print Page | Close Window