pkall and 2012 matrix regular key start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137922
Printed Date: April 19, 2024 at 6:11 AM
Topic: pkall and 2012 matrix regular key start
Posted By: wyciwug
Subject: pkall and 2012 matrix regular key start
Date Posted: December 10, 2014 at 7:27 AM
I have a new extra PKALL. I couldn't seem to find instruction for wiring diagram for PKALL to be used with remote start for 2012 Matrix? Can anyone please find out for me? Thanks
-------------
DCD
Replies:
Posted By: tedmond
Date Posted: December 10, 2014 at 8:44 AM
https://www.xpresskit.com/DocumentDownload.aspx?documentid=6830&productid=196&firmwareid=1636
or
https://fortin.ca/download/19971/key-override-all_installation_guide_(new_look).rev-20140918.pdf
install 20
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: wyciwug
Date Posted: December 10, 2014 at 12:15 PM
the diagram listed for 2010-2011, will this still work for 2012 then?
-------------
DCD
Posted By: tedmond
Date Posted: December 10, 2014 at 1:12 PM
same diagram.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: wyciwug
Date Posted: December 17, 2014 at 10:36 AM
I am going to run down the connections of the wires. Can anyone help me if there is something wrong? Thanks
Heavy Gauge wires from RS to car's
2 Red 12v to Black @ Fuse box
Pink ignition output to Brown @ ignition switch
Violet Start output to black @ ignition switch
Orange Accessory 1 output to Gray @ ignition switch
Pink/White ignition 2 output to Green @ ignition switch
* Use relay for second starter White @ ignition switch as follow:
85 to Avital 4013 thin Purple @ Pin 3 of 4-pin satellite harness
86 & 87 to + 12volt constant through 20 amp fuse
30 to second starter wire white @ ignition switch in car.
4-pin satellite from RS
Pink - not used
Purple - second starter turn on (see relay wiring set above)
Orange- not used
Blue status output (-) to Blue/White @ PKALL
9-pin harness from RS
GREEN/ black factory alarm disarm to car's Pink @ Driver Kick, white 18-pin plug, pin #6
GREEN / WHITE factory alarm arm to car's Black @ Driver kick, white 18-pin plug, pin #7
Yellow not used
WHITE/ blue not used
Orange not used
Brown to car's lite green horn switch or dash fuse box, white 30-pin, pin #9 (Plug 2A)
RED / white not used
Black to ground
White (+) parking light output to car's Green at Dash Fuse box, white 30-pin, pin #29, (Plug 2A)
5-pin plug from RS
BLACK/ white neutral safety shutdown to ground
Violet/white to car's Gray ac data link connector, white 16-pin plug, pin #9
Brown to car's brake wire blue # brake switch or dash fuse box, white 30-pin, pin #9, (Plug 2A)
Grey hood pin shut down to hood switch
Blue/white not used
2-pin door locks
Green lock to car's Purple driver kick, white 18-pin plug, pin #16
Blue unlock to car's Beige driver kick, white 18-pin plug, pin #15.
PKALL connections using W2W
D2D wires, Cut one plug,
Connect Pin #1 (either red or blue) to 12volt
Connect Pin #3 to Ground
4-pin wires
Light Green to cut IMI at the connector's end Pin #19
ORANGE / Brown to cut the other end of IMI
6-pin wires
PURPLE / white to IMO pin #21
Yellow black to ORANGE / Brown to the other end of IMI above
Blue/white to blue @ RS
Green not used
Pink not used
Black not used
Thank you guys.
-------------
DCD
|