ford n.c door trigger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137937
Printed Date: May 14, 2025 at 2:35 PM
Topic: ford n.c door trigger
Posted By: pts760
Subject: ford n.c door trigger
Date Posted: December 10, 2014 at 10:38 PM
I did a 2012 Ford Mustang MT Remote Start. I used tech Doc 1921 under the download section to interface the door triggers. My unit only had a negative door trigger input so I had to wire the 1921 tech doc to a PAC TR-7 to a relay to convert to a negative door trigger. For some reason the wiring with the 1921 Doc didn't have enough voltage to trigger the DEI 8616 relay and that's where the TR-7 came into play.
Anyways my question has anyone wired the NC ford door trigger to have a negative door trigger instead of a positive or is it even possible. The negative trigger would have saved me time and money.
-------------
I drink current, eat ohms, and bleed voltage
Replies:
Posted By: tedmond
Date Posted: December 10, 2014 at 11:15 PM
why not use the dome light wire and convert that to negative?
gray/purple (-) or (+) depending on model @ passenger kick
what unit?
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: pts760
Date Posted: December 10, 2014 at 11:22 PM
I originally used the dome light but the dome light kicked back on when the vehicle shut down after the MT takeover/shutdown procedure
It a crime stopper RS4-G4
-------------
I drink current, eat ohms, and bleed voltage
Posted By: pts760
Date Posted: December 10, 2014 at 11:25 PM
Edit: I meant after reservation mode
-------------
I drink current, eat ohms, and bleed voltage
|