Print Page | Close Window

2003 f150 viper 5706 remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137954
Printed Date: May 14, 2025 at 11:15 PM


Topic: 2003 f150 viper 5706 remote start

Posted By: mjkraffert
Subject: 2003 f150 viper 5706 remote start
Date Posted: December 12, 2014 at 10:18 PM

I have a quick question. I'm installing a Viper 5706 into my 2003 F-150. On the large wire connector there are 2 wires:

6 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL)
7 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL)

On my truck the starter wire is a RED / Light Blue wire. My question is do I cut the wire and connect The Green alarm wire to the side of the wire that comes from my key and the Violet wire to the side that runs to the starter? Or do I simply splice the Violet wire onto the RED / Light Blue wire? If I do the cut, does that effectively cause the system to lock out the ability to start the truck if you're trying to hot wire the truck? Thanks!



Replies:

Posted By: tedmond
Date Posted: December 12, 2014 at 11:27 PM
mjkraffert wrote:

My question is do I cut the wire and connect The Green alarm wire to the side of the wire that comes from my key and the Violet wire to the side that runs to the starter?

Correct

If I do the cut, does that effectively cause the system to lock out the ability to start the truck if you're trying to hot wire the truck?

yes, that is the purpose of a starter kill. the truck cannot be started when it is armed.


-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert



Posted By: mjkraffert
Date Posted: December 12, 2014 at 11:47 PM
Cool! Thanks


Print Page | Close Window