516L Remote Start Input on Viper 3203V
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137995
Printed Date: May 15, 2025 at 8:48 AM
Topic: 516L Remote Start Input on Viper 3203V
Posted By: nfsrun
Subject: 516L Remote Start Input on Viper 3203V
Date Posted: December 18, 2014 at 1:48 AM
Hey guys, I have a question in regards to how I should wire two of my wires for my 516L voice add-on to my Viper 3203V Alarm/Remote Start system. Below is a screenshot of which wires go to which from my 516L to the alarm system.
Then, this is the alarm diagram on the Viper.
However, the alarm diagram doesn't show the wires I need specifically to complete this. Does this mean I have to ditch the wire up for the remote start feature of the 516L, or are there other alternative methods/wires I can use? Any response is appreciated.
Then, this is the alarm diagram on the Viper.
However, the alarm diagram doesn't show the wires I need specifically to complete this. Does this mean I have to ditch the wire up for the remote start feature of the 516L, or are there other alternative methods/wires I can use? Any response is appreciated.