2006 scion xb dei 535t
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137999
Printed Date: April 28, 2024 at 7:00 PM
Topic: 2006 scion xb dei 535t
Posted By: irji619
Subject: 2006 scion xb dei 535t
Date Posted: December 18, 2014 at 9:25 PM
I installed a dei 535t in my scion xb. I tried getting into the learn routine but I can not get into learn routine. My window switches are not working. But the windows roll up and down from my remote. Can anyone help me? Thank you to any one that can.
Replies:
Posted By: irji619
Date Posted: December 29, 2014 at 11:03 AM
Does anyone have an answer to this. I want the 535t to operate my front windows only for up and down
Posted By: irji619
Date Posted: December 29, 2014 at 12:19 PM
Can anyone help me out with my 535t install on 2006 scion xb? Had anyone installed one of these successfully in that vehicle?
Posted By: chev104275
Date Posted: December 29, 2014 at 12:52 PM
I've never done that car but maybe listing out the connections you've made will help figure it out.
-------------
If i Can't Install it I Don't need it Joe
Posted By: irji619
Date Posted: December 29, 2014 at 5:15 PM
H2-7
Whitvoiolek - GREEN / WHITE switch side passenger down
H2-6
BROWN / black - RED / blue switch side passenger up
H2-2
White - GREEN / WHITE switch side driver down
H2-1
Brown - RED / blue switch side driver down
H1-8
Blue/black - RED / blue motor side passenger up
H1-7
GREEN/ black - GREEN / WHITE motor side passenger down
H1-3
Blue - RED / blue motor side driver up
H1-2
Green - GREEN / WHITE motor side driver down
H3-2, H3-1, H1-6, H1-5, H1-1
WHITE/ black, white, violet/black, black, violet
All to ground
The drivers window has factory one touch down. The rest of the windows are normal up and down.
Posted By: irji619
Date Posted: December 29, 2014 at 5:16 PM
And the orange wire is connected to ground when armed and the RED / white to RED / white of auxiliary 2
Posted By: howie ll
Date Posted: December 29, 2014 at 5:19 PM
Try wiring directly to the motor wires in each door, BUT I did a UK build Yaris recently that had one shot on the driver's side, the door module was built directly on to the motor so I left the driver's door alone.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: irji619
Date Posted: December 29, 2014 at 8:32 PM
I need to get my hands on a 530t. How did you get it to program without the driver door hooked up? I would really like to get the 535t to work correctly. And my scion is the same as that yaris with module built on motor. I will wire directly into the door tonight or tomorrow. Thank you.
Posted By: howie ll
Date Posted: December 30, 2014 at 2:27 AM
It was a 530, we don't have the 535 here yet.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|