immobilizer plug on a lexus rx 330
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138110
Printed Date: May 18, 2024 at 4:42 AM
Topic: immobilizer plug on a lexus rx 330
Posted By: durf23112
Subject: immobilizer plug on a lexus rx 330
Date Posted: January 01, 2015 at 12:50 PM
can't seem to find the bad boy. Its a black 7 pin plug but the one I found attached underneath the igntiion barrel has different color wires than the install manuals says. Anyone know where I can tap into the RX and TX data lines. Very frustrating
-------------
jf durf
Replies:
Posted By: durf23112
Date Posted: January 01, 2015 at 12:51 PM
BTW its a 2006 RX 330 with keyless entry but standard key start.
-------------
jf durf
Posted By: howie ll
Date Posted: January 01, 2015 at 1:37 PM
Try the body ECU, not sure what terminals.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: January 01, 2015 at 1:42 PM
Appears to be a black plug on TOP, pins 4 & 5.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: durf23112
Date Posted: January 02, 2015 at 8:30 AM
I can't find any black 7 pin plugs on top of the ignition barrel. Been looking around for 3 days now. couple of questions: 1. is it attached to the barrel and 2. if on top how do I get to it?
-------------
jf durf
Posted By: durf23112
Date Posted: January 02, 2015 at 8:32 AM
BTW, thanks for replying. I even got Lexus dealer to print out the plug location and its there somewhere but I just can't find it. I know the pin locations and the wire colors. do I have to takethe ignition off to locate or whats the best to get at it. Any pics?
-------------
jf durf
Posted By: howie ll
Date Posted: January 02, 2015 at 8:33 AM
Yes should be attached to the barrel.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: durf23112
Date Posted: January 02, 2015 at 8:33 AM
would also be nice to know which ECU plug and pin have same two wires TX and Code. Any help much appreciated
-------------
jf durf
Posted By: howie ll
Date Posted: January 02, 2015 at 8:34 AM
Trace the colours with care.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: kreg357
Date Posted: January 02, 2015 at 9:16 AM
It should be the standard 7 pin transponder plug found on many Toyota vehicles at the ignition switch. Pin 3 will be empty.
Pin 4 will be RX and Pin 5 will be TX. There is conflicting info as the the wires' color.
Here is the info from iDatalink :
RX pin 4 GREEN / WHITE (DATA)
TXCT pin 5 Blue / YELLOW (DATA)
Here is the info from DEI :
RX Immobilizer Pin 4 Light Green
TX Immobilizer Pin 5 Brown ------------- Soldering is fun!
Posted By: tedmond
Date Posted: January 02, 2015 at 1:18 PM
keep in mind, most toyota/lexus have telescopic steering wheels. IF you have it set all the way back, you won't be able to find the plug you're looking for.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: st1nky
Date Posted: January 02, 2015 at 10:52 PM
the camry ones were by the fusebox near steering colulmn
https://www.autostart.ca/Autosoft/images/AutosoftPics/naschart04975.jpg
see that black plug?
Posted By: st1nky
Date Posted: January 02, 2015 at 11:07 PM
an even better view, not sure lexis is same but its something
https://www.autostart.ca/Autosoft/images/AutosoftPics/naschart04979.jpg
beside the brake light switch
Posted By: vane0804
Date Posted: January 03, 2015 at 12:07 AM
I installed on 2008 rx350 and found it underneath barrel. (End of barrel was ignition switch wires, under barrel closer to the the front [where you insert key] was connector for transponder. . Had to cut sleeve to gain access to wires. ... how this helps
-------------
~It's me!
Posted By: durf23112
Date Posted: January 03, 2015 at 2:48 PM
thanks everyone I got it. The colors were different but the pins were right. BTQ it is the black plug UNDERNEATH the key cylinder. Now I need to figure out how to get heater to work when I remote start.
-------------
jf durf
|