Print Page | Close Window

Immobilzer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13812
Printed Date: September 02, 2025 at 3:26 PM


Topic: Immobilzer

Posted By: mosameer
Subject: Immobilzer
Date Posted: May 21, 2003 at 7:28 PM

Hey everyone!

Im about to install a remote start alarm on my friends car. It already has a immobilzer in it. Is there a way to bypass it? or can i keep the old one and still hook up the remote start wires to the ignition? my worry is that it may not work due to the immobilzer being there. and one other thing apparently there is an on/off switch under the bonnet that controls teh immobilzer. Any help would be much appreciated. Thanks!



Replies:

Posted By: Velocity Motors
Date Posted: May 21, 2003 at 7:34 PM
What make, year & model vehicle is this ? If there is a way to bypass during start, I would do that instead of loosing the anti-theft feature that was added to the vehicle.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: mosameer
Date Posted: May 21, 2003 at 7:38 PM
Well the make is a european car...peugot 306 cabriolet 1996...which you may not have heard...can i just hook up the wires to the ignition? willl the remote start still work?





Print Page | Close Window