compustar programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138193
Printed Date: May 02, 2024 at 2:20 PM
Topic: compustar programming
Posted By: ziggyb222
Subject: compustar programming
Date Posted: January 08, 2015 at 7:41 PM
Installed my first Compustar CM 800 tonight. Trying to get to the option in the menu to set it to tack mode so I can program the tack on this Corolla. For the life of me I cannot get to where I need to be...any help please????? and thanks
Replies:
Posted By: kreg357
Date Posted: January 08, 2015 at 8:18 PM
You can use the OP-500 on the CM800, if you have one... Can't help too much otherwise, only tried doing it with the remotes once or twice.
-------------
Soldering is fun!
Posted By: tedmond
Date Posted: January 08, 2015 at 8:33 PM
tach mode is default !
Just start the car, step on the brake and press the start button.
If you have the ADS-USB, use that its much easier to make option changes. You need to go to www.compustar.idatalink.com to change the settings. I assume you have an idatalink login.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: ziggyb222
Date Posted: January 08, 2015 at 11:58 PM
I do have that...and was not aware of that option...I will try that out....Thanks again!!!
Posted By: enice
Date Posted: January 09, 2015 at 1:08 AM
In the US tach is not default on the 800S but if you program the tach by holding the brake while the car is running and hold the remote start button down by 3.5 seconds it will switch to tach if you got the right
-------------
Eric
Audiomaxx
528 East Fordham Road
Bronx NY 10458
Compustar Top Gun Dealer Award 2012-2013
|