viper 5906v in wrangler

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138228
Printed Date: May 18, 2024 at 11:11 AM

Topic: viper 5906v in wrangler

Posted By: tkostansek
Subject: viper 5906v in wrangler
Date Posted: January 12, 2015 at 12:41 PM

Im installing a Viper 5906v in my jeep wrangler unlimited. It did not come with factory door locks so i installed my own last year using a Viper211. That is working fine. Im also using the progressive unlock with an extra relay. Now I would like to move up to the Viper 5906v for a remote start. I have the Idatalink ALCA module flashed CH5_EN for D2D with the viper. Im also going to use the T Harness ADS-HRN CH5. 2 questions for the Viper guru's. Will my alarm just talk to the ALCA D2D out of the box or is this something i need to enable? Also will I need to remove the Viper 211 and hard wire the locks to my new Viper. I see the door lock relays in the new Alarm Door lock 3 pin Harness. Its 500MA which should be plenty to pop my actuators but im not sure about the Progressive unlock. I see Pink/White is a Flex output. Hopefully someone knows this system and can advise me.

-------------
Tony

Replies:

Posted By: tedmond
Date Posted: January 12, 2015 at 1:07 PM

remove viper 211. the 5906 will communicate with the alca if it was correctly flashed, ready to go out of the box.

pink/white is not required.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: tkostansek
Date Posted: January 12, 2015 at 3:44 PM

Thanks. Will the Progressive unlock work. what wire is the second unlock?

Tk

-------------
Tony

Posted By: davep.
Date Posted: January 13, 2015 at 11:26 PM

tkostansek wrote:

Will the Progressive unlock work. what wire is the second unlock?

Yes progressive unlocking will work. Any of the (4) Aux outputs can be programed for 2nd unlock. Menu 2, Linking = None. Type = Option 6.