Print Page | Close Window

avital 2101 and spal central locking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138253
Printed Date: April 30, 2024 at 4:49 PM


Topic: avital 2101 and spal central locking

Posted By: decc
Subject: avital 2101 and spal central locking
Date Posted: January 15, 2015 at 4:54 AM

Hi Guys,

I have a 4x4 with working SPAL central locking - here is how it is wired:

posted_image

I'm trying to fir an Avital 2101 keyless entry kit to it, with the pinout below:

posted_image

The SPAL central locking is triggered by earthing either the purple or the brown wire (to lock or unlock respectively).

I have wired up the 2101 with the main power, earth and ignition .. when I press lock or unlock on the remote I can hear the relays inside click, however (with a multi-meter) I'm not able to see either 12+ or earth on any of the H5 through H9 leads.

I'm a bit at a loss, I'm not able to find anything in the manual that talks about setting the polarity for the locks, just the parking lights. I'm generally pretty good with these things however the manual for this is quite poor.

Thanks!
Dec



Replies:

Posted By: tedmond
Date Posted: January 15, 2015 at 8:29 AM
violet and violet/black to ground, blue/black and GREEN/ black to the spal trigger wires

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: decc
Date Posted: January 15, 2015 at 2:38 PM
Thanks, Ted! :)





Print Page | Close Window