Print Page | Close Window

avital 4113 / anti grind

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138258
Printed Date: May 05, 2024 at 1:14 AM


Topic: avital 4113 / anti grind

Posted By: jnz1
Subject: avital 4113 / anti grind
Date Posted: January 15, 2015 at 1:47 PM

Is is possible to add anti grind to the Avital 4113lx Single button RS even though it does not appear to have a GWA feature for the single button model? Vehicle for install is a 2003 Ford Escape. Thanks in advance.



Replies:

Posted By: kreg357
Date Posted: January 15, 2015 at 2:03 PM

Yes, you can use the 4113 H2/5 BLUE/WHITE (-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT if you are not using it for anything else.
You will need an extra 30/40 Amp SPDT relay.  Here is the wiring :

Relay Pin 85 to H2/5 BLUE/WHITE (-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT ( default programming )
Relay Pin 86 to +12V constant
Relay Pin 87a to vehicle side of cut Escape  tan/lt. blue Starter wire ( with 4113 thick PURPLE (+) (30 AMP) OUTPUT )
Relay Pin 30 to ignition switch side of cut Escape  tan/lt. blue Starter wire
Relay Pin 87  - not used



-------------
Soldering is fun!



Posted By: jnz1
Date Posted: January 16, 2015 at 12:01 AM
Perfect. Thanks


Print Page | Close Window