truck starts itself when battery connecte
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138285
Printed Date: October 31, 2025 at 12:25 AM
Topic: truck starts itself when battery connecte
Posted By: warlock62
Subject: truck starts itself when battery connecte
Date Posted: January 17, 2015 at 7:23 PM
Trying to install a viper 5906 to a 2004 silverado base model. Using dball2 w2w. My current connection are as follows.
6pin main harness
1 12v constant
2 chassis gnd
3 siren
4 n/A
5 parking light - gray/blk bcm brown plug
6 n/a
Door lock 3 pin
plugged into 451m module
Remote start 10 pin
1 n/a
2 12v constant ignition harness
3 n/a
4 white wire ignition harness
5 12v constant ignition harness
6 n/a
7 n/a
8 orange wire ignition harness
9 12v constant
10 pink wire ignition harness
24 pin conn
1 n/a
2 n/a
3 n/a
4 gray blk black plug bcm
5 ground while running wire to dball2
6 n/a
7 n/a
8 n/a
9 hood pin wire
10 n/a
11 n/a
12 tach wire to dball 2
13 chassis gnd
14 n/a
15 door output wire on dball 2
16 n/a
17 n/a
18 n/a
19 n/a
20 white wire on brake switch
21 through 24 n/a
Dball2 module
12v constant
ground
Data wire to violet wire on obd2
When I hooked up batter and started truck I went to turn key off and motor kept running. Had to pull fuses from alarm harness in order to get motor to turn off. Disconnecting battery did not work. Can someone plz tell me what I've hooked up wrong or do I have a bad brain box
Replies:
Posted By: warlock62
Date Posted: January 17, 2015 at 7:28 PM
It's an automatic truck
|